Promag LBR100 125kHz RFID reader and LBR 200 13.56MHz MIFARE reader run from any voltage from 5 to 12.5V DC and feature high read range at as low as 5 volts making it ideally suited to a wide variety of applications, particularly access control. The same basic unit can be configured to output most of the common interface formats, including Wiegand, Magstripe, and RS232 serial ASCII output, making it easy to upgrade existing installations.
Features:
New stylish housing to match modern construction
Wide Voltage range
Potted for environmental protection
Externally programmable interface
Weather resistant
Specifications:
Power Requirements: 5 ~ 12.5 V DC regulated, linear
Interfaces Wiegand, MSR ABA Track2 or RS232
Read Range:
LBR100 Up to 20 cm at 12.5V w/ISO card (RFID - Frequency 125KHz, ASK)
LBR200 Up to 5 cm at 12.5V w/ISO card (MIFARE UID Reader - 13.56MHz MIFARE UID)
Transponder Read only
Dimensions:
LBR100/LBR200 105 x106 x18 mm
wall-mounting for European type of light switch box
Temperature Range:
Readers: -25 ~ 65 Deg C
Transponders: -55 ~ 80 Deg C
Note: The Specification is subject to change without notice.
Available Versions
Discontinued - See related products or contact usLBR100 (RFID) (Discontinued)
LBR200 (MIFARE) (Discontinued)
MIFARE is a registered Trademark of NXP B.V.